VERSION 1 ########################################################## # __ __ __ __ __ # # .--------|__|--| |__| .-----.--.--|__|--| |-----. # # | | | _ | |__| _ | | | | _ | -__| # # |__|__|__|__|_____|__|__|___ |_____|__|_____|_____| # # |_____| # # # ########################################################## # Generated on 2026-01-22 by https://midi.guide , the open, # 'comprehensive' dataset of all MIDI CCs and NRPNs. # Contributions welcome! # Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL TRACKNAME Super Gemini Super 8 # Can be POLY, DRUM, MPE, or NULL TYPE NULL # Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL OUTPORT NULL # Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI OUTCHAN NULL # Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL INPORT NULL # Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG INCHAN NULL # This defines the default 'MAX RATE' for automation lanes. # Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1 MAXRATE NULL # DRUMLANES # Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME # ROW must be between 1 and 8 # TRIG can be between 0 and 127, or NULL # CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL # NOTENUMBER can be between 0 and 127, or NULL # NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL # Please note this section will be discarded for tracks which are not DRUM tracks [DRUMLANES] [/DRUMLANES] # PC # Syntax: NUMBER NAME # number must be either: # - A number (for simple PC) # - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB. # PC must be between 1...128 # MSB/LSB must be between 0...127 [PC] [/PC] # CC # Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME # DEFAULT_VALUE must be a valid number between 0 and 127 [CC] 87 Arpeggiator Sequencer hold 83 Arpeggiator Sequencer swing 86 Arpeggiator Sequencer on off 14 Sequence load 82 Arpeggiator range 84 Arpeggiator Sequencer external clock 85 Arpeggiator Sequencer mode 3 Tempo 107 Clock divider 81 Clock sync 2 Ribbon coarse 34 Ribbon fine 4 Foot controller 9 Mod amount Fine adjust 11 Expression 61 Performance control destination 64 Sustain pedal 67 Octave select 111 Performance detune 1 Modulation lever 30 Range 29 Waveform 35 Tune 106 Range 31 Waveform 36 Mode 26 PWM Wave modulation 23 Modulator destination 21 LFO 1 amount 22 Envelope 1 amount 70 LFO 2 amount 28 Cross modulation 25 PW Detune 27 PWM Wave modulation source 76 Pitch bend amount 94 Drift 91 Delay send 93 Chorus 12 Delay time 13 Delay feedback 69 Delay freeze 52 Attack hold 51 Keytrack 50 Mode 53 Attack 56 Release 55 Sustain 32 Decay hold 54 Decay 72 Release 73 Attack 57 Decay 33 Decay hold 58 Sustain 122 Local control on off 5 Portamento time 65 Portamento layer select 96 Data increment 97 Data decrement 104 Modulation layer 120 All sound off 121 Reset all controllers 123 All notes off 124 Omni mode off 125 Omni mode on 126 Mono mode on 17 Rate 16 Waveform HF mode 20 Mode 19 LR phase pan spread 18 Delay 62 Rate 60 Trigger source 110 Rate modulation 105 Waveform 63 Delay 37 Oscillator mix 10 Pan 80 Binaural mode 108 Lower layer detune 59 Manual mode 24 Super mode 48 VCA dynamics 7 VCA envelope level 92 VCA LFO 1 amount 109 VCA DDS 2 amount 49 VCA envelope mode 42 VCA LFO 2 amount 77 Pitch bend amount 74 Filter cutoff frequency 71 Resonance 41 Drive 43 Keytrack 44 Envelope source 45 Envelope amount 46 LFO 1 amount 47 DDS 2 amount 75 LFO 2 amount 95 HPF cutoff frequency 79 Unison size 78 Voice assign mode 127 Poly mode on [/CC] # CC Pair # Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME # DEFAULT_VALUE must be a valid number between 0 and 16383 [CC_PAIR] 6:38 Data entry 99:98 NRPN 101:100 RPN [/CC_PAIR] # NRPN # Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME" # Lsb & msb should be between 0 and 127 # Note: LSB can be over 127 ONLY if MSB is 0 or omitted # e.g. '0:1026:7 FOO', or ':2000:7 BAR' # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively # DEPTH can be 7 or 14 # For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs) [NRPN] [/NRPN] # ASSIGN # Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE # POT_NUMBER must be between 1 and 8 # TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot). # Non explicitly-defined pots will be considered "NULL" # VALUE VALIDATION #### For CC: Value must be a valid number between 0 and 119 #### For PB and AT, any text after the TYPE will be ignored #### For CV, value must be between 1 and 4 #### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14 # DEFAULT VALUE #### For CC: DEFAULT_VALUE must be a valid number between 0 and 127 #### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383 #### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs) #### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V" #### Please note default value will be ignored for PB and AT messages. [ASSIGN] [/ASSIGN] # AUTOMATION # Syntax: TYPE:VALUE # TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN" # VALUE VALIDATION #### For CC: Value must be a valid number between 0 and 119 #### For PB and AT, any text after the TYPE will be ignored #### For CV, value must be between 1 and 4 #### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14 # NOTE: You are limited to 64 automation lanes [AUTOMATION] [/AUTOMATION] # This section will be readable from Hapax. [COMMENT] [/COMMENT]