VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated for HapaxOS 3.22 on 2026-10-27 by https://midi.guide,
#   the open, 'comprehensive' dataset of all MIDI CCs and NRPNs.
#   Contributions welcome!


# TRACKNAME
###########
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+'. Can also be NULL.
TRACKNAME deconstruct MINIMAL


# TYPE
######
# Can be POLY, DRUM, MPE, AFTR, POLYAT or NULL
# POLY refers to polyphony, i.e. more than one note. Used for standard MIDI
#   gear and controllers. Confusingly, this is appropriate for instruments
#   and controllers that do not support poly aftertouch.
#
# POLYAT and AFTR are exchangeable, and both handle poly aftertouch as well as
#   channel aftertouch.
TYPE NULL


# OUTPORT
#########
# Can be A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI cable),
#   USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
OUTPORT NULL


# OUTCHAN
#########
# Can be a value between 1 and 16, or NULL. This is ignored if output port is
#   not MIDI.
OUTCHAN NULL


# INPORT
########
# Can be NONE, ALLACTIVE, A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI
#   cable), USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
INPORT NULL


# INCHAN
########
# Can be a value between 1 and 16, ALL, or NULL. This definition will be ignored
#   if INPORT is NONE, ALLACTIVE or CVG.
INCHAN NULL


# MAXRATE
#########
# This defines the default MAXRATE for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL


# DRUMLANES
###########
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
#  - ROW must be between 1 and 16
#  - TRIG can be between 0 and 127, or NULL
#  - CHAN can be a number between 1 and 16, CVG[1-4], CV[1-4], G[1-4], or NULL
#  - NOTENUMBER can be between 0 and 127, or NULL
#  - NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+'. It can
#    also be NULL
#
# This section will be discarded for tracks which are not DRUM tracks.
[DRUMLANES]
[/DRUMLANES]


# PC
####
# Syntax: NUMBER NAME
#  - NUMBER must be either a number (for simple PC), or three numbers,
#    delimited by ':', which represent PC:MSB:LSB. You can put 'NULL'
#    to not set the MSB/LSB
#  - PC must be between 1...128
#  - MSB and LSB, if set, must be between 0...127
[PC]
[/PC]


# CC
####
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 127
[CC]
33 Filter cutoff
41 Glide curve
40 Drive bypass
39 Level
38 Drive
37 Accent
36 Filter envelope decay
35 Filter envelope depth
34 Filter resonance
26 Accent soft
25 Accent hard
25 Accent
68 Pattern level
51 Isolator low
52 Isolator mid
53 Isolator high
54 Reverb type
55 Reverb
56 Delay mix
57 Delay time
58 Delay feedback
59 Delay ping pong
60 Delay sync
61 Delay to reverb
62 Master effect bypass
63 Master effect type
64 Master effect parameter
65 Pattern swing
66 Pattern swing resolution
67 Feel
25 Accent hard
26 Accent soft
27 Repitch
23 Mute
22 Random velocity
21 Level
20 Pan
19 Delay send
18 Reverb send
17 Decay
16 Attack
15 Move
14 Tone
13 Tune
42 Octave
44 Swing resolution
43 Swing
12 Sound
24 Sound bank
[/CC]


# CC_PAIR
#########
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_\LSB:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 16383
[CC_PAIR]
[/CC_PAIR]


# NRPN
######
# Syntax: MSB:LSB:DEPTH NAME or MSB:LSB:DEPTH:DEFAULT=xx NAME
#  - MSB and LSB should be between 0 and 127
#  - LSB can be over 127 ONLY if MSB is either 0 or omitted. For example:
#    "0:1026:7 FOO" or ":2000:7 BAR"
#    These examples are equivalent to "8:2:7 FOO" and "15:80:7 BAR"
#  - DEPTH can be 7 or 14
#  - DEFAULT_VALUE must be between 0 and 127 (for 7-bit NRPNs) or
#    between 0 and 16383 (for 14-bit NRPNs)
[NRPN]
[/NRPN]


# ASSIGN
########
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
#  - POT_NUMBER must be between 1 and 8
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN",
#    or "NULL" (this won't assign the pot)
#  - Non explicitly-defined pots will be considered "NULL"
#
# VALUE validation
#  - CC: VALUE must be a valid number between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# DEFAULT_VALUE
#  - CC: DEFAULT_VALUE must be between 0 and 127
#  - PB: DEFAULT_VALUE must be between 0 and 16383
#  - NRPN: DEFAULT_VALUE must be a number between 0 and 127 (for 7-bit NRPNs)
#    or between 0 and 16383 (for 14-bit NRPNs)
#  - CV: DEFAULT_VALUE must be either between 0 and 65535, or a voltage between
#    -5V and 5V, e.g. "-4.25V" or "1.7V"
#
# DEFAULT_VALUE will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
############
# Syntax: TYPE:VALUE
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
#
# VALUE validation
#  - CC: VALUE must be between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# You are limited to 64 automation lanes.
[AUTOMATION]
[/AUTOMATION]


# COMMENT
#########
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]