VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated for HapaxOS 3.22 on 2026-10-23 by https://midi.guide,
#   the open, 'comprehensive' dataset of all MIDI CCs and NRPNs.
#   Contributions welcome!


# TRACKNAME
###########
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+'. Can also be NULL.
TRACKNAME TR-8


# TYPE
######
# Can be POLY, DRUM, MPE, AFTR, POLYAT or NULL
# POLY refers to polyphony, i.e. more than one note. Used for standard MIDI
#   gear and controllers. Confusingly, this is appropriate for instruments
#   and controllers that do not support poly aftertouch.
#
# POLYAT and AFTR are exchangeable, and both handle poly aftertouch as well as
#   channel aftertouch.
TYPE NULL


# OUTPORT
#########
# Can be A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI cable),
#   USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
OUTPORT NULL


# OUTCHAN
#########
# Can be a value between 1 and 16, or NULL. This is ignored if output port is
#   not MIDI.
OUTCHAN NULL


# INPORT
########
# Can be NONE, ALLACTIVE, A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI
#   cable), USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
INPORT NULL


# INCHAN
########
# Can be a value between 1 and 16, ALL, or NULL. This definition will be ignored
#   if INPORT is NONE, ALLACTIVE or CVG.
INCHAN NULL


# MAXRATE
#########
# This defines the default MAXRATE for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL


# DRUMLANES
###########
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
#  - ROW must be between 1 and 16
#  - TRIG can be between 0 and 127, or NULL
#  - CHAN can be a number between 1 and 16, CVG[1-4], CV[1-4], G[1-4], or NULL
#  - NOTENUMBER can be between 0 and 127, or NULL
#  - NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+'. It can
#    also be NULL
#
# This section will be discarded for tracks which are not DRUM tracks.
[DRUMLANES]
[/DRUMLANES]


# PC
####
# Syntax: NUMBER NAME
#  - NUMBER must be either a number (for simple PC), or three numbers,
#    delimited by ':', which represent PC:MSB:LSB. You can put 'NULL'
#    to not set the MSB/LSB
#  - PC must be between 1...128
#  - MSB and LSB, if set, must be between 0...127
[PC]
[/PC]


# CC
####
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 127
[CC]
9 Shuffle
12 External IN Level
13 External IN Side Chain
16 Delay Level
17 Delay Time
18 Delay Feedback
20 BD Tune
21 BD Attack
22 BD Comp
23 BD Decay
24 BD Level
25 SD Tune
26 SD Snappy
27 SD Comp
28 SD Decay
29 SD Level
46 LT Tune
47 LT Decay
48 LT Level
49 MT Tune
50 MT Decay
51 MT Level
52 HT Tune
53 HT Decay
54 HT Level
55 RS Tune
56 RS Decay
57 RS Level
58 HC Tune
59 HC Decay
60 HC Level
61 CH Tune
62 CH Decay
63 CH Level
68 Scatter Type
69 Scatter Depth
70 Scatter SW
71 Accent
80 OH Tune
81 OH Decay
82 OH Level
83 CC Tune
84 CC Decay
85 CC Level
86 RC Tune
87 RC Decay
88 RC Level
89 Reverb Time
90 Reverb Gate
91 Reverb Level
[/CC]


# CC_PAIR
#########
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_\LSB:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 16383
[CC_PAIR]
[/CC_PAIR]


# NRPN
######
# Syntax: MSB:LSB:DEPTH NAME or MSB:LSB:DEPTH:DEFAULT=xx NAME
#  - MSB and LSB should be between 0 and 127
#  - LSB can be over 127 ONLY if MSB is either 0 or omitted. For example:
#    "0:1026:7 FOO" or ":2000:7 BAR"
#    These examples are equivalent to "8:2:7 FOO" and "15:80:7 BAR"
#  - DEPTH can be 7 or 14
#  - DEFAULT_VALUE must be between 0 and 127 (for 7-bit NRPNs) or
#    between 0 and 16383 (for 14-bit NRPNs)
[NRPN]
[/NRPN]


# ASSIGN
########
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
#  - POT_NUMBER must be between 1 and 8
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN",
#    or "NULL" (this won't assign the pot)
#  - Non explicitly-defined pots will be considered "NULL"
#
# VALUE validation
#  - CC: VALUE must be a valid number between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# DEFAULT_VALUE
#  - CC: DEFAULT_VALUE must be between 0 and 127
#  - PB: DEFAULT_VALUE must be between 0 and 16383
#  - NRPN: DEFAULT_VALUE must be a number between 0 and 127 (for 7-bit NRPNs)
#    or between 0 and 16383 (for 14-bit NRPNs)
#  - CV: DEFAULT_VALUE must be either between 0 and 65535, or a voltage between
#    -5V and 5V, e.g. "-4.25V" or "1.7V"
#
# DEFAULT_VALUE will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
############
# Syntax: TYPE:VALUE
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
#
# VALUE validation
#  - CC: VALUE must be between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# You are limited to 64 automation lanes.
[AUTOMATION]
[/AUTOMATION]


# COMMENT
#########
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]