VERSION 1

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME JD-XA

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
1 Modulation
2 OSC2 PWM
4 OSC2 PW
5 Portamento Time
7 Volume
10 Panpot
11 Expression
12 Reverb Level
13 Delay Level
14 TFX1 Control
15 TFX2 Control
16 LFO1 Rate
17 LFO2 Rate
18 LFO3 Rate
19 OSC1 Pitch
20 OSC2 Pitch
21 OSC3 Pitch
22 OSC1 Fine
23 OSC2 Fine
24 OSC3 Fine
25 OSC1 Cross MOD
26 OSC1 P ENV Depth
27 OSC2 P ENV Depth
28 OSC3 P ENV Depth
29 OSC1 Level
30 OSC2 Level
31 AUX Level
64 Hold
65 Portamento
70 Atck Pitch ENV
71 Resonance
72 Release Time
73 Attack Time
74 Cutoff
75 Decay Time
76 Vibrato Rate
77 Vibrato Depth
78 Vibrato Delay
80 TFX1 Select
81 TFX2 Select
82 Delay Time
83 MIC Level
91 TFX Reverb Send LEV
92 LFO Pitch Depth
93 LFO Filter Depth
94 LFO AMP Depth
95 Decay Pitch ENV
98 Nrpn MSB
99 Nrpn LSB
100 RPN MSB
101 RPN LSB
102 OSC1 Cutoff
103 Cutoff Fine OSC2 Cutoff
104 OSC3 Cutoff
105 OSC1 Resonance
106 OSC2 Resonance
107 OSC3 Resonance
108 OSC1 Filt ENV Depth
109 OSC2 Filt ENV Depth
110 OSC3 Filt ENV Depth
111 OSC1 KEY Follow
112 OSC2 KEY Follow Fine
113 OSC3 KEY Follow
114 OSC1 HPF Cutoff
115 Drive OSC2 HPF Cutoff
116 OSC3 HPF Cutoff
117 AMP Level
120 ALL Sound OFF
121 Reset ALL Controllers
122 Local ON OFF
123 ALL Notes OFF
124 Omni OFF
125 Omni ON
126 Mono
127 Poly

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
0:3:7 P1 LFO Shape
0:4:7 P2 LFO Shape
0:5:7 P3 LFO Shape
0:15:7 P1 LFO Pitch Depth
0:16:7 P2 LFO Pitch Depth
0:17:7 P3 LFO Pitch Depth
0:18:7 P1 LFO Filter Depth
0:19:7 P2 LFO Filter Depth
0:20:7 P3 LFO Filter Depth
0:21:7 P1 LFO AMP Depth
0:22:7 P2 LFO AMP Depth
0:23:7 P3 LFO AMP Depth
0:37:7 Analog Pulse Width
0:124:7 P1 Envelope
0:125:7 P2 Envelope
0:126:7 P3 Envelope

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]