VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated for HapaxOS 3.22 on 2026-10-22 by https://midi.guide,
#   the open, 'comprehensive' dataset of all MIDI CCs and NRPNs.
#   Contributions welcome!


# TRACKNAME
###########
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+'. Can also be NULL.
TRACKNAME OB-X8


# TYPE
######
# Can be POLY, DRUM, MPE, AFTR, POLYAT or NULL
# POLY refers to polyphony, i.e. more than one note. Used for standard MIDI
#   gear and controllers. Confusingly, this is appropriate for instruments
#   and controllers that do not support poly aftertouch.
#
# POLYAT and AFTR are exchangeable, and both handle poly aftertouch as well as
#   channel aftertouch.
TYPE NULL


# OUTPORT
#########
# Can be A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI cable),
#   USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
OUTPORT NULL


# OUTCHAN
#########
# Can be a value between 1 and 16, or NULL. This is ignored if output port is
#   not MIDI.
OUTCHAN NULL


# INPORT
########
# Can be NONE, ALLACTIVE, A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI
#   cable), USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
INPORT NULL


# INCHAN
########
# Can be a value between 1 and 16, ALL, or NULL. This definition will be ignored
#   if INPORT is NONE, ALLACTIVE or CVG.
INCHAN NULL


# MAXRATE
#########
# This defines the default MAXRATE for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL


# DRUMLANES
###########
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
#  - ROW must be between 1 and 16
#  - TRIG can be between 0 and 127, or NULL
#  - CHAN can be a number between 1 and 16, CVG[1-4], CV[1-4], G[1-4], or NULL
#  - NOTENUMBER can be between 0 and 127, or NULL
#  - NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+'. It can
#    also be NULL
#
# This section will be discarded for tracks which are not DRUM tracks.
[DRUMLANES]
[/DRUMLANES]


# PC
####
# Syntax: NUMBER NAME
#  - NUMBER must be either a number (for simple PC), or three numbers,
#    delimited by ':', which represent PC:MSB:LSB. You can put 'NULL'
#    to not set the MSB/LSB
#  - PC must be between 1...128
#  - MSB and LSB, if set, must be between 0...127
[PC]
[/PC]


# CC
####
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 127
[CC]
1 MOD BOX LFO2 Bend Amount
3 Vintage
5 Portamento Rate
6 Data Entry MSB
7 Master Volume
8 Program Volume
9 Transpose UP Down
10 Page2 Panwidth
11 Expresion Pedal
12 OSC1 Xmod
13 OSC1 Filter ENV MOD
14 Page2 OSC Xmod AMT
15 OSC1 Freq
16 OSC2 Freq
17 OSC2 Detune
18 Page2 Voice Detune Range
19 OSC1 Waveform
20 OSC2 Waveform
21 OSC1 PW
22 OSC2 PW
23 OSC Square Mode
24 OSC1 Sync
25 OSC1 Level
26 OSC2 Level
27 Page2 OSC1 ON Level
28 Page2 OSC2 ON Level
29 Noise Level
30 Page2 Noise ON Level
31 Filter Modulation
32 Bank Select LSB
33 Filter Frequency
34 Filter Resonance
35 Filter Type
36 Filter Keyboard
37 Page2 Filter KBD ON Level
38 Data Entry LSB
39 Filter ENV Attack
40 Filter ENV Decay
41 Filter ENV Sustain
42 Filter ENV Release
43 Filter ENV Velocity ON OFF
44 Filter Pressure
45 Volume ENV Attack
46 Volume ENV Decay
47 Volume ENV Sustain
48 Volume ENV Release
49 Volume ENV Velocity ON OFF
50 ENV Type
51 LFO1 Rate
52 LFO1 Shape
53 LFO1 Depth1
54 LFO1 Depth2
55 LFO1 Dest1 OSC1
56 LFO1 Dest1 OSC2
57 LFO1 Dest1 Filter
58 LFO1 Dest2 PWM1
59 LFO1 Dest2 PWM2
60 LFO1 Dest2 Volume
61 LFO Pressure
62 Page2 LFO Type
63 Page2 LFO Sample Hold IN
64 Sustain
70 Unison
71 Unison Voice Count
72 Unison KEY Mode
73 Page2 Pedal Release
74 Brightness Filter Cutoff Relative
75 MOD BOX LFO2 Rate
76 MOD BOX LFO2 Shape
77 MOD BOX LFO2 Dest OSC1
78 MOD BOX LFO2 Dest OSC2
79 MOD BOX LFO2 Depth
80 MOD BOX LFO2 Bend OSC2 Only
81 MOD BOX Mode
82 MOD Boxlfo2 Lower
83 MOD BOX LFO2 Upper
84 MOD Boxarp ON
85 MOD Boxarp Speed
86 MOD Boxarp Hold KBD
87 MOD BOX ARP Down UP
88 MOD BOX ARP Lower
89 MOD BOX ARP Upper
90 ARP Transpose
91 Page2 Portamento Mode
92 Page2 Portamento Match
93 Page2 Portamento Quantize
94 Page2 Portamento Legato
95 Lower Upper NO Select
96 Data Increment
97 Data Decrement
98 Nrpn LSB
99 Nrpn MSB
100 RPN LSB
101 RPN MSB
102 Page2 LFO1 Trigger
103 Page2 LFO1 Trigger Phase
104 Page2 LFO1 KBD Track
105 Page2 LFO1 MOD1 Ramp Delay
106 Page2 LFO1 MOD1 Ramp UP
107 Page2 LFO1 Ramp Invert
108 Page2 LFO1 MOD1 Quantize
109 Page2 LFO1 OSC1 MOD1 Invert
110 Page2 LFO1 MOD2 Ramp Delay
111 Page2 LFO1 MOD2 Ramp UP
112 Page2 LFO1 MOD2 Ramp Invert
113 Page2 LFO1 MOD2 Quantize
114 Page2 LFO1 OSC1 MOD2 Invert
115 Page2 MOD2 Ramp TO LFO Speed
116 Page2 LFO Shift Voices58
117 Page2 Chord KEY Limit
118 Page2 Chord Hold Mode
119 Normal Split Double Mode
120 ALL Sound OFF
121 Reset Controllers
122 Local Control ON OFF
123 ALL Notes OFF
124 Omni Mode OFF
125 Omni Mode ON
126 Mono Mode ON
127 Poly Mode ON
[/CC]


# CC_PAIR
#########
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_\LSB:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 16383
[CC_PAIR]
[/CC_PAIR]


# NRPN
######
# Syntax: MSB:LSB:DEPTH NAME or MSB:LSB:DEPTH:DEFAULT=xx NAME
#  - MSB and LSB should be between 0 and 127
#  - LSB can be over 127 ONLY if MSB is either 0 or omitted. For example:
#    "0:1026:7 FOO" or ":2000:7 BAR"
#    These examples are equivalent to "8:2:7 FOO" and "15:80:7 BAR"
#  - DEPTH can be 7 or 14
#  - DEFAULT_VALUE must be between 0 and 127 (for 7-bit NRPNs) or
#    between 0 and 16383 (for 14-bit NRPNs)
[NRPN]
[/NRPN]


# ASSIGN
########
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
#  - POT_NUMBER must be between 1 and 8
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN",
#    or "NULL" (this won't assign the pot)
#  - Non explicitly-defined pots will be considered "NULL"
#
# VALUE validation
#  - CC: VALUE must be a valid number between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# DEFAULT_VALUE
#  - CC: DEFAULT_VALUE must be between 0 and 127
#  - PB: DEFAULT_VALUE must be between 0 and 16383
#  - NRPN: DEFAULT_VALUE must be a number between 0 and 127 (for 7-bit NRPNs)
#    or between 0 and 16383 (for 14-bit NRPNs)
#  - CV: DEFAULT_VALUE must be either between 0 and 65535, or a voltage between
#    -5V and 5V, e.g. "-4.25V" or "1.7V"
#
# DEFAULT_VALUE will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
############
# Syntax: TYPE:VALUE
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
#
# VALUE validation
#  - CC: VALUE must be between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# You are limited to 64 automation lanes.
[AUTOMATION]
[/AUTOMATION]


# COMMENT
#########
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]