VERSION 1

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Bass Station II

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
109 Latch
108 Enable
119 Rhythm
118 Note mode
116 Arp swing
111 Octaves
102 Mod Env attack
92 Amp Env sustain
93 Amp Env release
90 Amp Env attack
91 Amp Env decay
105 Mod Env release
104 Mod Env sustain
103 Mod Env decay
82 Resonance
114 Overdrive
106 Slope
85 Mod Env depth
84 Shape
83 Type
94 Distortion
115 Osc Filter Mod
86 LFO 1 delay
88 LFO 1 waveform
87 LFO 2 delay
89 LFO 2 waveform
5 Portamento
7 Patch volume
95 Limit
74 Osc 1 manual PW amount
73 Osc 1 LFO 2 PW amount
72 Osc 1 Mod Env PW amount
71 Osc 1 Mod Env depth
70 Osc 1 range
110 Osc 1-2 sync
75 Osc 2 range
76 Osc 2 Mod Env depth
77 Osc 2 Mod Env PW amount
78 Osc 2 LFO 2 PW amount
79 Osc 2 manual PW amount
80 Sub osc waveform
81 Sub osc oct
107 Bend amount
113 Mod Env 
112 Amp Env 

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]
17:49 LFO 2 depth
16:48 Frequency
18:50 LFO 1 speed
19:51 LFO 2 speed
23:55 Noise level
22:54 Sub osc level
21:53 Osc 2 level
20:52 Osc 1 level
25:57 External signal level
24:56 Ring mod level
28:60 Osc 1 LFO 1 depth
27:59 Osc 1 coarse
26:58 Osc 1 fine
31:63 Osc 2 LFO 1 depth
30:62 Osc 2 coarse
29:61 Osc 2 fine

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
0:76:7 LFO 2 speed
0:74:7 Filter freq
0:75:7 LFO 1 osc pitch
0:106:7 Seq retrig
0:117:7 Amp Env retrigger count
0:114:7 Amp Env fixed duration sustain
0:109:7 Amp Env retrigger
0:73:7 Amp Env mode
0:118:7 Mod Env retrigger count
0:115:7 Mod Env fixed duration sustain
0:110:7 Mod Env retrigger
0:105:7 Mod Env mode
0:108:7 Filter tracking
0:91:7 LFO 2 speed sync
0:86:7 LFO 1 slew
0:87:7 LFO 1 speed sync
0:89:7 LFO 1 key sync
0:90:7 LFO 2 slew
0:93:7 LFO 2 key sync
0:116:7 Overlay write protection
0:112:7 Overlay bank selection
0:70:7 LFO 1 osc pitch
0:78:7 Osc 2 pitch
0:71:7 LFO 2 filter freq
0:72:7 Osc 1 waveform
0:111:7 Osc tuning error
0:107:7 Paraphonic mode
0:82:7 Osc 2 waveform
0:113:7 Glide divergence
0:77:7 Sub osc fine tuning
0:84:7 Sub osc coarse tuning

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]