VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated on 2026-04-30 by https://midi.guide , the open,
# 'comprehensive' dataset of all MIDI CCs and NRPNs.
# Contributions welcome!

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Lead 4 Lead 4R

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
37 Amplifier envelope sustain
36 Amplifier envelope decay
73 Amplifier envelope attack
35 Amplifier velocity
72 Amplifier envelope release
71 Output level
89 Arpeggiator direction
93 Arpeggiator impulse sync
92 Arpeggiator keyboard sync
90 Arpeggiator run
87 Arpeggiator clock division
9 Arpeggiator tempo
86 Arpeggiator master clock
88 Arpeggiator range
32 Bank select LSB
79 Delay feedback
57 Delay clock division
51 Delay master clock
77 Delay tempo
50 Delay reverb selection
76 Delay reverb amount
97 Delay reverb on off
52 Effects on off
55 Effects amount
53 Effects selection
11 Control pedal
1 Modulation wheel
64 Sustain pedal
7 Volume pedal
42 Filter resonance
47 Filter drive
43 Filter envelope amount
45 Filter velocity
46 Filter keyboard tracking
38 Filter envelope attack
39 Filter envelope decay
40 Filter envelope sustain
41 Filter envelope release
44 Filter type
74 Filter frequency
20 LFO 1 waveform
19 LFO 1 rate
21 LFO 1 destination
22 LFO 1 amount
2 LFO 1 master clock
3 LFO 1 clock divisions
83 LFO 1 keyboard sync
59 LFO 1 impulse sync
91 LFO 1   arpeggiator on off
18 LFO 2 master clock
14 LFO 2 clock divisions
12 LFO 2 keyboard sync
13 LFO 2 impulse sync
23 LFO 2 rate
85 LFO 2 waveform
24 LFO 2 destination
25 LFO 2 amount
27 Modulation envelope decay
6 Modulation envelope impulse sync
109 Modulation envelope release mode
29 Modulation envelope amount
28 Modulation envelope destination
26 Modulation envelope attack
30 Oscillator 1 waveform
8 Oscillator mix
105 Oscillator modulation select
69 Oscillator modulation amount
63 Oscillator 2 noise keyboard tracking
62 Oscillator 2 noise frequency
61 Oscillator 2 noise resonance
34 Oscillator 2 keyboard tracking
33 Oscillator 2 fine tune
78 Oscillator 2 semitones
31 Oscillator 2 waveform
49 Oscillator 1 wavetable selection
117 Pattern selection
115 Slot enable
119 Slot focus
10 Pan
94 Reverb bright
96 Reverb model
118 Pitch bend range
16 Voice mode unison
58 Hold
5 Glide rate
56 Vibrato select
70 Impulse morph buttons
112 Chord enable
54 Hold enable
15 Mono selector
17 Octave shift

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]