VERSION 1 # Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL TRACKNAME Muse # Can be POLY, DRUM, MPE, or NULL TYPE NULL # Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL OUTPORT NULL # Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI OUTCHAN NULL # Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL INPORT NULL # Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG INCHAN NULL # This defines the default 'MAX RATE' for automation lanes. # Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1 MAXRATE NULL # DRUMLANES # Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME # ROW must be between 1 and 8 # TRIG can be between 0 and 127, or NULL # CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL # NOTENUMBER can be between 0 and 127, or NULL # NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL # Please note this section will be discarded for tracks which are not DRUM tracks [DRUMLANES] [/DRUMLANES] # PC # Syntax: NUMBER NAME # number must be either: # - A number (for simple PC) # - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB. # PC must be between 1...128 # MSB/LSB must be between 0...127 [PC] [/PC] # CC # Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME # DEFAULT_VALUE must be a valid number between 0 and 127 [CC] 1 Mod Wheel 3 Mute 5 Glide Time 7 Timbre Volume 8 Low Cut 9 Pan Spread 10 Pan 11 Expression 12 LFO 1 Rate 13 LFO 1 Amount 14 LFO 1 Waveform 15 LFO 2 Rate 16 LFO 2 Amount 17 LFO 2 Waveform 18 Pitch LFO Rate 19 Pitch LFO Shape 20 Pitch LFO Amount 21 Pitch LFO OSC 1 22 Pitch LFO OSC 2 23 Pitch LFO Mod OSC 24 Pitch LFO Detune 25 Modulation Oscillator Frequency 26 Modulation Oscillator Audio 27 Modulation Oscillator KB Track 28 Modulation Oscillator Waveform 29 Modulation Oscillator KB Reset 30 Modulation Oscillator Unipolar 31 Modulation Oscillator Pitch Amount 33 Modulation Oscillator Pitch OSC 1 34 Modulation Oscillator Pitch OSC 2 35 Modulation Oscillator PWM Amount 36 Modulation Oscillator PWM OSC 1 37 Modulation Oscillator PWM OSC 2 39 Modulation Oscillator Filter Amount 40 Modulation Oscillator Filter 1 41 Modulation Oscillator Filter 2 42 Modulation Oscillator VCA Amount 43 Modulation Oscillator VCA PAN 44 Oscillator 1 Octave 45 Oscillator 1 Frequency 46 Oscillator 1 Tri Saw Mix 47 Oscillator 1 PW 48 Oscillator 1 Wave Mix 49 Oscillator 2 Octave 50 Oscillator 2 Frequency 51 Oscillator 2 Tri Saw Mix 52 Oscillator 2 PW 53 Oscillator 2 Wave Mix 54 Oscillator 21 SYNC 55 Oscillator 21 FM 56 Oscillator 12 FM 57 FM Amount 58 Oscillator 1 Level 59 Oscillator 2 Level 60 Ring Mod Level 61 Modulation Oscillator Level 62 Noise Level 64 Sustain Pedal 65 Clipping Level 66 Filter 1 High Pass 67 Filter 1 Cutoff 68 Filter 1 Resonance 69 Filter 1 Envelope Amount 70 Filter 1 KB Tracking 71 Hold 72 Filter 2 Frequency 73 Filter 2 Resonance 75 Filter 2 Envelope Amount 76 Filter 2 KB Tracking 77 Link Filters 78 Filters Order 79 Filter Env Attack 80 Filter Env Sustain 81 Filter Env Delay 82 Filter Env Release 83 Filter Env Loop 85 Filter Env Velocity 86 VCA Env Attack 87 VCA Env Sustain 88 VCA Env Delay 89 VCA Env Release 90 VCA Env Loop 91 VCA Env Velocity 92 Voice Detune 93 Delay Time Left 94 Delay Time Right 95 Link Delays 102 Delay Clock Sync 103 Delay Feedback 104 Delay Character 105 Delay Mix 106 Delay Timbre A 107 Delay Timbre B 108 Voice Unison 109 Voice Mono 110 Sequencer Clock Div 111 Arpeggiator Clock Div 112 Arpeggiator On Off 113 Arpeggiator FW BK 114 Arpeggiator Direction 115 Arpeggiator Octave Range 116 Clock Tempo [/CC] # CC Pair # Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME # DEFAULT_VALUE must be a valid number between 0 and 16383 [CC_PAIR] [/CC_PAIR] # NRPN # Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME" # Lsb & msb should be between 0 and 127 # Note: LSB can be over 127 ONLY if MSB is 0 or omitted # e.g. '0:1026:7 FOO', or ':2000:7 BAR' # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively # DEPTH can be 7 or 14 # For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs) [NRPN] [/NRPN] # ASSIGN # Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE # POT_NUMBER must be between 1 and 8 # TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot). # Non explicitly-defined pots will be considered "NULL" # VALUE VALIDATION #### For CC: Value must be a valid number between 0 and 119 #### For PB and AT, any text after the TYPE will be ignored #### For CV, value must be between 1 and 4 #### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14 # DEFAULT VALUE #### For CC: DEFAULT_VALUE must be a valid number between 0 and 127 #### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383 #### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs) #### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V" #### Please note default value will be ignored for PB and AT messages. [ASSIGN] [/ASSIGN] # AUTOMATION # Syntax: TYPE:VALUE # TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN" # VALUE VALIDATION #### For CC: Value must be a valid number between 0 and 119 #### For PB and AT, any text after the TYPE will be ignored #### For CV, value must be between 1 and 4 #### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14 # NOTE: You are limited to 64 automation lanes [AUTOMATION] [/AUTOMATION] # This section will be readable from Hapax. [COMMENT] [/COMMENT]