VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated on 2025-06-28 by https://midi.guide , the open,
# 'comprehensive' dataset of all MIDI CCs and NRPNs.
# Contributions welcome!

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Skulpt

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
80 Anim 1 cc
83 Anim 4 cc
81 Anim 2 cc
82 Anim 3 cc
58 Arp status
61 Arp division
60 Arp direction
59 Arp octave
12 Distortion
55 Delay MIDI sync
14 Delay time
15 Delay feedback
13 Delay
32 FEG amount
51 AEG amount
87 All envelope release
86 All envelope sustain
85 All envelope decay
84 All envelope attack
22 FEG attack
23 FEG decay
24 FEG sustain
25 FEG release
26 AEG attack
27 AEG decay
28 AEG sustain
29 AEG release
43 MEG attack
44 MEG decay
45 MEG sustain
46 MEG release
49 MEG amount
35 Reso
34 Cutoff
121 Randomise patch
62 Velo depth
9 Voice mode
7 Headphone volume
5 Glide
65 Aftertouch depth
63 Note depth
66 Ext depth
64 Sustain pedal
75 Transpose
53 Ring mod
11 Expression pedal
36 LFO1 rate, sync
39 LFO1 shape
47 LFO2 rate, no sync
47 LFO2 rate, sync
48 LFO2 depth
50 LFO2 shape
52 LFO1 MIDI sync
54 LFO2 MIDI sync
56 LFO1 mode
57 LFO2 mode
36 LFO1 rate, no sync
37 LFO1 depth
105 Mod slot 5 source
95 Mod slot 8 depth
101 Mod slot 1 source
102 Mod slot 2 source
103 Mod slot 3 source
104 Mod slot 4 source
106 Mod slot 6 source
107 Mod slot 7 source
108 Mod slot 8 source
111 Mod slot 1 dest
112 Mod slot 2 dest
113 Mod slot 3 dest
114 Mod slot 4 dest
115 Mod slot 5 dest
116 Mod slot 6 dest
117 Mod slot 7 dest
118 Mod slot 8 dest
88 Mod slot 1 depth
89 Mod slot 2 depth
90 Mod slot 3 depth
91 Mod slot 4 depth
92 Mod slot 5 depth
93 Mod slot 6 depth
94 Mod slot 7 depth
1 Modulation wheel
96 Mod wheel depth
21 Chord mode
40 Octave
19 FM amount
18 OSC mix
17 OSC2 wave
16 OSC1 wave
33 Morph
31 OSC2 fine detune
30 OSC2 course detune
20 Spread
78 Swing
67 Sequence length
70 Sequence hold
71 Sequence loop

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]