VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated for HapaxOS 3.22 on 2026-11-07 by https://midi.guide,
#   the open, 'comprehensive' dataset of all MIDI CCs and NRPNs.
#   Contributions welcome!


# TRACKNAME
###########
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+'. Can also be NULL.
TRACKNAME CARBON8


# TYPE
######
# Can be POLY, DRUM, MPE, AFTR, POLYAT or NULL
# POLY refers to polyphony, i.e. more than one note. Used for standard MIDI
#   gear and controllers. Confusingly, this is appropriate for instruments
#   and controllers that do not support poly aftertouch.
#
# POLYAT and AFTR are exchangeable, and both handle poly aftertouch as well as
#   channel aftertouch.
TYPE NULL


# OUTPORT
#########
# Can be A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI cable),
#   USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
OUTPORT NULL


# OUTCHAN
#########
# Can be a value between 1 and 16, or NULL. This is ignored if output port is
#   not MIDI.
OUTCHAN NULL


# INPORT
########
# Can be NONE, ALLACTIVE, A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI
#   cable), USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
INPORT NULL


# INCHAN
########
# Can be a value between 1 and 16, ALL, or NULL. This definition will be ignored
#   if INPORT is NONE, ALLACTIVE or CVG.
INCHAN NULL


# MAXRATE
#########
# This defines the default MAXRATE for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL


# DRUMLANES
###########
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
#  - ROW must be between 1 and 16
#  - TRIG can be between 0 and 127, or NULL
#  - CHAN can be a number between 1 and 16, CVG[1-4], CV[1-4], G[1-4], or NULL
#  - NOTENUMBER can be between 0 and 127, or NULL
#  - NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+'. It can
#    also be NULL
#
# This section will be discarded for tracks which are not DRUM tracks.
[DRUMLANES]
[/DRUMLANES]


# PC
####
# Syntax: NUMBER NAME
#  - NUMBER must be either a number (for simple PC), or three numbers,
#    delimited by ':', which represent PC:MSB:LSB. You can put 'NULL'
#    to not set the MSB/LSB
#  - PC must be between 1...128
#  - MSB and LSB, if set, must be between 0...127
[PC]
[/PC]


# CC
####
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 127
[CC]
61 Arp Division
59 Arp Octave
53 Arp Gate
58 Arp Status
60 Arp Direction
118 Joystick Y-
117 Joystick X-
116 Joystick X+
73 Global FX Amount
55 Delay MIDI Sync
80 AEG Type
43 MEG Attack
44 MEG Decay
45 MEG Sustain
46 MEG Release
87 All EG Release
49 MEG Depth
51 AEG Depth
82 MEG Type
26 AEG Attack
27 AEG Decay
28 AEG Sustain
29 AEG Release
84 All EG Attack
85 All EG Decay
86 All EG Sustain
42 Filter Type
32 FEG Amount
24 FEG Sustain
25 FEG Release
33 Filter Warp
34 Filter Cutoff
35 Filter Resonance
81 FEG Type
23 FEG Decay
75 Transpose
76 Tempo MSB
77 Tempo LSB
78 Swing
7 Main Volume
11 Expression Pedal
125 Omni On
124 Omni Off
123 All Notes Off
121 Reset All Controllers
120 All Sound Off
119 Patch Gain
40 Octave
5 Glide
64 Sustain Pedal
83 Audio In
54 LFO Modes
52 LFO MIDI Sync
50 LFO2 Shape
48 LFO2 Depth
47 LFO2 Rate
39 LFO1 Shape
12 LFO3 Transform
37 LFO1 Depth
36 LFO1 Rate
3 LFO3 Rate
22 LFO3 Shape
13 LFO3 Depth
56 LFO1 Transform
57 LFO2 Transform
110 ModSlot 3 Dest
1 Mod Wheel
9 Voice Mode
41 Delay Mode
93 ModSlot 6 Depth
94 ModSlot 7 Depth
95 ModSlot 8 Depth
96 Chord Mode
100 ModSlot 1 Source
101 ModSlot 2 Source
102 ModSlot 3 Source
103 ModSlot 4 Source
104 ModSlot 5 Source
105 ModSlot 6 Source
106 ModSlot 7 Source
107 ModSlot 8 Source
108 ModSlot 1 Dest
109 ModSlot 2 Dest
111 ModSlot 4 Dest
112 ModSlot 5 Dest
113 ModSlot 6 Dest
114 ModSlot 7 Dest
115 ModSlot 8 Dest
88 ModSlot 1 Depth
89 ModSlot 2 Depth
90 ModSlot 3 Depth
91 ModSlot 4 Depth
92 ModSlot 5 Depth
31 Osc2 Fine
16 Osc1 Contour
15 Osc1 Fine
14 Osc1 Tune
30 Osc2 Tune
21 OscMod Mode
20 Osc2 Level
19 Osc1 Level
63 Osc2 Core
62 Osc1 Core
18 Osc XMod
17 Osc2 Contour
72 Seq Record
71 Seq Loop
70 Seq Hold
69 Seq Clear Lane
68 Seq Lane on off
67 Seq Length
79 Seq Quantise
[/CC]


# CC_PAIR
#########
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 16383
[CC_PAIR]
[/CC_PAIR]


# NRPN
######
# Syntax: MSB:LSB:DEPTH NAME or MSB:LSB:DEPTH:DEFAULT=xx NAME
#  - MSB and LSB should be between 0 and 127
#  - LSB can be over 127 ONLY if MSB is either 0 or omitted. For example:
#    "0:1026:7 FOO" or ":2000:7 BAR"
#    These examples are equivalent to "8:2:7 FOO" and "15:80:7 BAR"
#  - DEPTH can be 7 or 14
#  - DEFAULT_VALUE must be between 0 and 127 (for 7-bit NRPNs) or
#    between 0 and 16383 (for 14-bit NRPNs)
[NRPN]
[/NRPN]


# ASSIGN
########
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
#  - POT_NUMBER must be between 1 and 8
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN",
#    or "NULL" (this won't assign the pot)
#  - Non explicitly-defined pots will be considered "NULL"
#
# VALUE validation
#  - CC: VALUE must be a valid number between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# DEFAULT_VALUE
#  - CC: DEFAULT_VALUE must be between 0 and 127
#  - PB: DEFAULT_VALUE must be between 0 and 16383
#  - NRPN: DEFAULT_VALUE must be a number between 0 and 127 (for 7-bit NRPNs)
#    or between 0 and 16383 (for 14-bit NRPNs)
#  - CV: DEFAULT_VALUE must be either between 0 and 65535, or a voltage between
#    -5V and 5V, e.g. "-4.25V" or "1.7V"
#
# DEFAULT_VALUE will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
############
# Syntax: TYPE:VALUE
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
#
# VALUE validation
#  - CC: VALUE must be between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# You are limited to 64 automation lanes.
[AUTOMATION]
[/AUTOMATION]


# COMMENT
#########
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]