VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated on 2026-04-25 by https://midi.guide , the open,
# 'comprehensive' dataset of all MIDI CCs and NRPNs.
# Contributions welcome!

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME RADIAS

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
7 Level
84 Drive switch
83 Drive depth
10 Panpot
82 Foot switch
4 Foot control
11 Expression
64 Sustain
65 Portamento switch
1 Modulation
2 Breath control
88 Release
87 Sustain
86 Decay
85 Attack
75 Decay
72 Release
70 Sustain
73 Attack
109 High gain
110 Low gain
26 Routing
28 Keyboard track
79 EG1 intensity
71 Resonance
74 Cutoff
27 Type balance
82 Keyboard track
29 Type
30 Cutoff
68 Resonance
69 EG1 intensity
125 Omni mode on
120 All sound off
121 Reset all controllers
123 All note off
124 Omni mode off
115 Switch
12 Edit 1
112 Edit 2
113 Edit 2
116 Switch
13 Edit 1
89 Wave
90 Frequency
76 Frequency
102 Wave
114 Edit
94 Switch
24 Oscillator 2 level
23 Oscillator 1 level
25 Noise level
111 Switch
15 Control 1
17 Control 2
8 Wave
9 Modulation type
18 Wave
21 Tune
20 Semitone
19 Modulation type
5 Portamento time
32 Bank select LSB
3 Unison switch
103 Patch 1 intensity
104 Patch 2 intensity
105 Patch 3 intensity
106 Patch 4 intensity
107 Patch 5 intensity
108 Patch 6 intensity

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
0:4:7 Latch on off
0:3:7 Octave range
0:2:7 Arpeggiator on off
0:11:7 Select switch
0:10:7 Gate time
0:7:7 Type
4:29:14 Step 14 value
4:26:14 Step 11 value
4:25:14 Step 10 value
4:31:14 Step 16 value
4:30:14 Step 15 value
4:24:14 Step 9 value
4:19:14 Step 4 value
4:23:14 Step 8 value
4:22:14 Step 7 value
4:21:14 Step 6 value
4:20:14 Step 5 value
4:18:14 Step 3 value
4:17:14 Step 2 value
4:16:14 Step 1 value
4:28:14 Step 13 value
4:27:14 Step 12 value
4:40:14 Step 9 value
4:32:14 Step 1 value
4:33:14 Step 2 value
4:34:14 Step 3 value
4:35:14 Step 4 value
4:36:14 Step 5 value
4:37:14 Step 6 value
4:38:14 Step 7 value
4:39:14 Step 8 value
4:41:14 Step 10 value
4:42:14 Step 11 value
4:43:14 Step 12 value
4:44:14 Step 13 value
4:45:14 Step 14 value
4:46:14 Step 15 value
4:47:14 Step 16 value
4:57:14 Step 10 value
4:58:14 Step 11 value
4:59:14 Step 12 value
4:63:14 Step 16 value
4:62:14 Step 15 value
4:61:14 Step 14 value
4:60:14 Step 13 value
4:48:14 Step 1 value
4:49:14 Step 2 value
4:50:14 Step 3 value
4:51:14 Step 4 value
4:52:14 Step 5 value
4:53:14 Step 6 value
4:54:14 Step 7 value
4:55:14 Step 8 value
4:56:14 Step 9 value
0:20:7 Latch
0:26:7 Gate time
0:36:7 Latch
0:42:7 Gate time
5:2:14 Timbre 3 switch
5:1:14 Timbre 2 switch
5:0:7 Timbre 1 switch
5:4:14 Vocoder switch
5:3:14 Timbre 4 switch
4:3:14 Patch 4 source
4:1:14 Patch 2 source
4:0:7 Patch 1 source
4:12:14 Patch 5 destination
4:13:14 Patch 6 destination
4:11:14 Patch 4 destination
4:10:14 Patch 3 destination
4:9:14 Patch 2 destination
4:8:14 Patch 1 destination
4:5:14 Patch 6 source
4:4:14 Patch 5 source
4:2:14 Patch 3 source
4:93:14 Band 14 pan
4:92:14 Band 13 pan
4:91:14 Band 12 pan
4:78:14 Band 15 level
4:77:14 Band 14 level
4:76:14 Band 13 level
4:75:14 Band 12 level
4:64:14 Band 1 level
4:65:14 Band 2 level
4:66:14 Band 3 level
4:67:14 Band 4 level
4:68:14 Band 5 level
4:69:14 Band 6 level
4:70:14 Band 7 level
4:71:14 Band 8 level
4:72:14 Band 9 level
4:73:14 Band 10 level
4:74:14 Band 11 level
4:89:14 Band 10 pan
4:88:14 Band 9 pan
4:87:14 Band 8 pan
4:86:14 Band 7 pan
4:85:14 Band 6 pan
4:84:14 Band 5 pan
4:83:14 Band 4 pan
4:90:14 Band 11 pan
4:82:14 Band 3 pan
4:81:14 Band 2 pan
4:80:14 Band 1 pan
4:79:14 Band 16 level
4:96:14 Fc mod source
4:95:14 Band 16 pan
4:94:14 Band 15 pan

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]