VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated for HapaxOS 3.22 on 2026-11-01 by https://midi.guide,
#   the open, 'comprehensive' dataset of all MIDI CCs and NRPNs.
#   Contributions welcome!


# TRACKNAME
###########
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+'. Can also be NULL.
TRACKNAME prologue


# TYPE
######
# Can be POLY, DRUM, MPE, AFTR, POLYAT or NULL
# POLY refers to polyphony, i.e. more than one note. Used for standard MIDI
#   gear and controllers. Confusingly, this is appropriate for instruments
#   and controllers that do not support poly aftertouch.
#
# POLYAT and AFTR are exchangeable, and both handle poly aftertouch as well as
#   channel aftertouch.
TYPE NULL


# OUTPORT
#########
# Can be A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI cable),
#   USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
OUTPORT NULL


# OUTCHAN
#########
# Can be a value between 1 and 16, or NULL. This is ignored if output port is
#   not MIDI.
OUTCHAN NULL


# INPORT
########
# Can be NONE, ALLACTIVE, A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI
#   cable), USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
INPORT NULL


# INCHAN
########
# Can be a value between 1 and 16, ALL, or NULL. This definition will be ignored
#   if INPORT is NONE, ALLACTIVE or CVG.
INCHAN NULL


# MAXRATE
#########
# This defines the default MAXRATE for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL


# DRUMLANES
###########
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
#  - ROW must be between 1 and 16
#  - TRIG can be between 0 and 127, or NULL
#  - CHAN can be a number between 1 and 16, CVG[1-4], CV[1-4], G[1-4], or NULL
#  - NOTENUMBER can be between 0 and 127, or NULL
#  - NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+'. It can
#    also be NULL
#
# This section will be discarded for tracks which are not DRUM tracks.
[DRUMLANES]
[/DRUMLANES]


# PC
####
# Syntax: NUMBER NAME
#  - NUMBER must be either a number (for simple PC), or three numbers,
#    delimited by ':', which represent PC:MSB:LSB. You can put 'NULL'
#    to not set the MSB/LSB
#  - PC must be between 1...128
#  - MSB and LSB, if set, must be between 0...127
[PC]
[/PC]


# CC
####
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 127
[CC]
16 Attack
19 Release
18 Sustain
17 Decay
94 On Off
89 Type
30 Time
31 Depth
28 Speed
92 On Off
29 Depth
88 Type
23 Release
20 Attack
21 Decay
22 Sustain
44 Resonance
83 Keytrack
82 Low Cut
84 Drive
45 EG Int
43 Cutoff
56 Target
57 Wave
58 Mode
24 Rate
26 Intensity
5 Portamento Time
14 Voice Spread
27 Voice Mode Depth
40 VCO 2 Level
39 VCO 1 Level
33 Multi Engine Level
80 Ring Sync
42 Pitch EG Int
81 Pitch EG Target
41 Cross Mod Depth
53 Type
52 Octave
54 Shape
64 Damper
32 Bank Select LSB
85 Edit Timbre
86 Timbre Type
8 Main Sub Balance
121 Reset All Controllers
120 All Sound Off
34 Pitch
50 Wave
36 Shape
48 Octave
51 Wave
37 Shape
49 Octave
35 Pitch
[/CC]


# CC_PAIR
#########
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_\LSB:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 16383
[CC_PAIR]
[/CC_PAIR]


# NRPN
######
# Syntax: MSB:LSB:DEPTH NAME or MSB:LSB:DEPTH:DEFAULT=xx NAME
#  - MSB and LSB should be between 0 and 127
#  - LSB can be over 127 ONLY if MSB is either 0 or omitted. For example:
#    "0:1026:7 FOO" or ":2000:7 BAR"
#    These examples are equivalent to "8:2:7 FOO" and "15:80:7 BAR"
#  - DEPTH can be 7 or 14
#  - DEFAULT_VALUE must be between 0 and 127 (for 7-bit NRPNs) or
#    between 0 and 16383 (for 14-bit NRPNs)
[NRPN]
[/NRPN]


# ASSIGN
########
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
#  - POT_NUMBER must be between 1 and 8
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN",
#    or "NULL" (this won't assign the pot)
#  - Non explicitly-defined pots will be considered "NULL"
#
# VALUE validation
#  - CC: VALUE must be a valid number between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# DEFAULT_VALUE
#  - CC: DEFAULT_VALUE must be between 0 and 127
#  - PB: DEFAULT_VALUE must be between 0 and 16383
#  - NRPN: DEFAULT_VALUE must be a number between 0 and 127 (for 7-bit NRPNs)
#    or between 0 and 16383 (for 14-bit NRPNs)
#  - CV: DEFAULT_VALUE must be either between 0 and 65535, or a voltage between
#    -5V and 5V, e.g. "-4.25V" or "1.7V"
#
# DEFAULT_VALUE will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
############
# Syntax: TYPE:VALUE
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
#
# VALUE validation
#  - CC: VALUE must be between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# You are limited to 64 automation lanes.
[AUTOMATION]
[/AUTOMATION]


# COMMENT
#########
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]