VERSION 1

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Typhon

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
1 MOD Wheel
2 CC2
4 Cutoff
3 Resonance
5 Wave
33 VCF EG Level
31 VCF EG Time
27 VCF EG Attack
28 VCF EG Decay
29 VCF EG Sustain
30 VCF EG Release
38 VCA EG Time
34 VCA EG Attack
35 VCA EG Decay
36 VCA EG Sustain
37 VCA EG Release
6 OSC2 Tune
7 Glide Amount
8 VC OS Level
9 Filter Tracking
11 Filter FM Amount
12 HP Cutoff
13 HP Resonance
14 FX1 Parameter1
15 FX1 Parameter2
16 FX1 MIX
17 FX2 Parameter1
18 FX2 Parameter2
19 FX2 Parameter3
20 FX2 Parameter4
21 FX2 MIX
22 FX3 Parameter1
23 FX3 Parameter2
24 FX3 Parameter3
25 FX3 Parameter4
26 FX3 MIX
40 M1 Parameter1
41 M1 Parameter2
42 M1 Parameter3
43 M1 CV Level
44 M1 CV1 Level
45 M1 CV2 Level
46 M1 Wave Level
47 M1 Cutoff Level
48 M1 VCA Level
50 M1 FFM Level
49 M1 FX1 Level
51 M1 FX2 Level
52 M1 FX3 Level
53 M1 Custom1 Level
54 M1 Custom2 Level
55 M1 Custom3 Level
56 M2 Parameter1
57 M2 Parameter2
58 M2 Parameter3
59 M2 CV Level
60 M2 CV1 Level
61 M2 CV2 Level
62 M2 Wave Level
63 M2 Cutoff Level
65 M2 VCA Level
67 M2 FFM Level
66 M2 FX1 Level
68 M2 FX2 Level
69 M2 FX3 Level
70 M2 Custom1 Level
71 M2 Custom2 Level
72 M2 Custom3 Level
73 M3 Parameter1
74 M3 Parameter2
75 M3 Parameter3
76 M3 CV Level
77 M3 CV1 Level
78 M3 CV2 Level
79 M3 Wave Level
80 M3 Cutoff Level
81 M3 VCA Level
83 M3 FFM Level
82 M3 FX1 Level
84 M3 FX2 Level
85 M3 FX3 Level
86 M3 Custom1 Level
87 M3 Custom2 Level
88 M3 Custom3 Level
89 SEQ Length
90 SEQ Division
91 SEQ Probability
92 SEQ Swing

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]