VERSION 1

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Nymphes

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
1 MOD Wheel
3 LPF EG Depth
4 LPF Tracking
5 Glide
7 AMP Level
8 LFO Cutoff Depth
9 OSC Level
10 SUB Level
11 Noise Level
12 Pulse Width
13 LFO Pitch Depth
14 EG Pitch Depth
15 Detune
16 Chord Selector
17 Play Mode
18 LFO1 Rate
19 LFO1 Wave
20 LFO1 Delay
21 LFO1 Fade
22 LFO1 Type
23 LFO1 KEY Sync
24 LFO2 Rate
25 LFO2 Wave
26 LFO2 Delay
27 LFO2 Fade
28 LFO2 Type
29 LFO2 KEY Sync
30 MS Selector
31 MS OSC Wave Depth
32 MS OSC Level Depth
33 MS SUB Level Depth
34 MS Noise Level Depth
35 MS LFO Pitch Depth Depth
36 MS Pulse Width Depth
37 MS Glide Depth
39 MS Detune Depth
40 MS Chord Selector Depth
41 MS EG Pitch Depth Depth
42 MS LPF Cutoff Depth
43 MS Resonance Depth
44 MS LPF EG Depth Depth
45 MS HPF Cutoff Depth
46 MS LPF Tracking Depth
47 MS LPF Cutoff LFO Depth Depth
48 MS Filter EG Attack Depth
49 MS Filter EG Decay Depth
50 MS Filter EG Sustain Depth
51 MS Filter EG Release Depth
52 MS Filter AMP Attack Depth
53 MS Filter AMP Decay Depth
54 MS Filter AMP Sustain Depth
55 MS Filter AMP Release Depth
56 MS LFO1 Rate Depth
57 MS LFO1 Wave Depth
58 MS LFO1 Delay Depth
59 MS LFO1 Fade Depth
60 MS LFO2 Rate Depth
61 MS LFO2 Wave Depth
62 MS LFO2 Delay Depth
63 MS LFO2 Fade Depth
86 MS Reverb Size Depth
87 MS Reverb Decay Depth
88 MS Reverb Filter Depth
89 MS Reverb MIX Depth
64 Sustain Pedal
68 Legato
70 OSC Wave
71 Resonance
72 AMP EG Release
73 AMP EG Attack
74 LPF Cutoff
75 Reverb Size
76 Reverb Decay
77 Reverb Filter
78 Reverb MIX
79 Filter EG Attack
80 Filter EG Decay
81 HPF Cutoff
82 Filter EG Sustain
83 Filter EG Release
84 AMP EG Decay
85 AMP EG Sustain

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]