VERSION 1

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Prophet X Prophet XL

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
1 MOD Wheel
3 BPM
5 Glide Mode
7 Master Volume
8 SUB OSC
10 PAN Spread
12 Voice Volume
13 AB Mode
14 Slider1 POS
15 Slider2 POS
16 FX1 ON OFF
17 FX1 Select
18 FX1 MIX
19 FX1 Param1
20 FX1 Param2
21 FX1 Param3
22 FX2 ON OFF
23 FX2 Select
24 FX2 MIX
25 FX2 Param1
26 FX2 Param2
27 FX2 Param3
28 16 Voice Mode
29 Split Point
32 Bank Select
40 AMP ENV Amount
41 Velocity TO AMP ENV
42 AMP ENV Delay
43 AMP ENV Attack
44 AMP ENV Decay
45 AMP ENV Sustain
46 AMP ENV Release
47 Filter ENV Amount
48 Velocity TO Filter ENV
49 Filter ENV Delay
50 Filter ENV Attack
51 Filter ENV Decay
52 Filter ENV Sustain
53 Filter ENV Release
54 Inst1 Glide Amount
55 Inst2 Glide Amount
56 OSC1 Glide Amount
57 OSC2 Glide Amount
58 Arpeggiator ON OFF
59 Arpeggiator Mode
60 Arpeggiator Range
61 Arpeggiator Relatch
62 Clock Divide
63 Arpeggiator Repeats
64 Sustain Pedal
65 Glide ON OFF
66 Inst1 Freq
67 Inst1 Fine Tune
68 Inst1 Level
69 Inst1 PAN
70 Inst1 Loop ON OFF
71 Inst1 Reverse
72 Inst2 Freq
73 Inst2 Fine TUN
75 Inst2 Level
76 Inst2 PAN
77 Inst2 Loop ON
78 Inst2 Reverse
79 Osc21 Sync
80 OSC1 FRQ
81 OSC1 Fine Freq
82 OSC1 Level
83 OSC1 Shape
84 OSC1 Shape MOD
85 OSC1 PAN
86 OSC2 FRQ
87 OSC2 Fine Freq
88 OSC2 Level
89 OSC2 Shape
90 OSC2 Shape MOD
91 OSC2 PAN
92 OSC Slop
93 Hack
94 Decimate
102 Cutoff
103 Reso
104 Filt Keyb Amount
105 Drive
106 LP Stereo Split
116 Unison ON OFF
117 Unison Detune
118 Unison Mode

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]