VERSION 1

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Prophet Rev2

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
1 MOD Wheel
3 FX Type
5 Glide Mode
7 Master Volume
8 SUB Oscillator
9 OSC Slop
10 PAN MOD Mode
12 FX Param1
13 FX Param2
14 BPM
15 Clock Divide
16 FX ON OFF
17 FX MIX
18 A B Mode
19 Sequencer Type
20 OSC1 Frequency
21 OSC1 Fine Tune
22 OSC1 Shape
23 OSC1 Glide Rate Time
24 OSC2 Frequency
25 OSC2 Fine Tune
26 OSC2 Shape
27 OSC2 Glide Rate Time
28 OSC MIX
29 Noise Level
30 OSC1 Shape MOD
31 OSC2 Shape MOD
33 ARP ON OFF
34 ARP Mode
35 ARP Range
36 ARP Repeats
37 Voice Volume
39 Split Point
64 Sustain Pedal
65 Glide ON OFF
75 AMP Sustain
76 AMP Release
77 ENV3 Sustain
78 ENV3 Release
85 ENV3 Destination
86 ENV3 Amount
87 ENV3 Velocity
88 ENV3 Delay
89 ENV3 Attack
90 ENV3 Decay
102 Filter Frequency
103 Resonance
104 Filter KEY Amount
105 Filter Audio MOD
106 Filter ENV Amount
107 Filter ENV Velocity
108 Filter Delay
109 Filter Attack
110 Filter Decay
111 Filter Sustain
112 Filter Release
113 VCA Level
114 PAN Spread
115 AMP ENV Amount
116 AMP ENV Velocity
117 AMP Delay
118 AMP Attack
119 AMP Decay

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]
0:1:7 N OSC1 Freq Fine
0:2:7 N OSC1 Shape
0:3:7 N OSC1 Glide
0:4:7 N OSC1 KBD ON OFF
0:5:7 N OSC2 Freq
0:6:7 N OSC2 Freq Fine
0:7:7 N OSC2 Shape
0:8:7 N OSC2 Glide
0:10:7 N Sync ON OFF
0:11:7 N GLD Mode
0:12:7 N Slop
0:13:7 N OSC MIX
0:14:7 N Noise
0:15:7 N Filter Cutoff
0:16:7 N Filter RES
0:17:7 N KEY Track
0:18:7 N Audio MOD
0:19:7 N2 PL4 PL MDE
0:20:7 N Filter ENV AMT
0:21:7 N Filter ENV VEL
0:22:7 N Filter ENV DLY
0:23:7 N Filter ENV ATT
0:24:7 N Filter ENV DEC
0:25:7 N Filter ENV SUS
0:26:7 N Filter ENV REL
0:28:7 N PAN Spread
0:29:7 N Voice Volume
0:30:7 N VCA ENV AMT
0:31:7 N VCA ENV VEL
0:32:7 N VCA ENV DEL
0:33:7 N VCA ENV ATT
0:34:7 N VCA ENV DEC
0:35:7 N VCA ENV SUS
0:37:7 N VCA ENV REL
0:38:7 N LFO1 Shape
0:39:7 N LFO1 Amoun
0:40:7 N LFO1 Dest
0:41:7 N LFO1 CLK Sync
0:42:7 N LFO2 Freq
0:43:7 N LFO2 Shape
0:49:7 N LFO2 Amnt
0:45:7 N LFO2 Dest
0:46:7 N LFO2 CLK Sync
0:47:7 N LFO3 Freq
0:48:7 N LFO3 Shape
0:50:7 N LFO Dest
0:51:7 N LFO3 CLK Sync
0:52:7 N LFO Freq
0:53:7 N LFO4 Shape
0:54:7 N LFO4 Amnt
0:55:7 N LFO4 Dest
0:56:7 N LFO4 CLK Sync
0:57:7 N ENV3 Dest
0:58:7 N ENV3 Amnt
0:59:7 N ENV3 VEL
0:60:7 N ENV3 DEL
0:61:7 N ENV3 ATT
0:62:7 N ENV3 DEC
0:63:7 N ENV3 SUS
0:64:7 N ENV3 REL
0:65:7 N MOD1 Source
0:66:7 N MOD1 Amnt
0:67:7 N MOD1 Dest
0:68:7 N MOD2 Source
0:69:7 N MOD2 Amnt
0:70:7 N MOD2 Dest
0:71:7 N MOD3 Source
0:72:7 N MOD3 Amnt
0:73:7 N MOD3 Dest
0:74:7 N MOD4 Source
0:75:7 N MOD4 Amnt
0:76:7 N MOD4 Dest
0:77:7 N MOD5 Source
0:78:7 N MOD5 Amnt
0:79:7 N MOD5 Dest
0:80:7 N MOD6 Source
0:81:7 N MOD6 Amnt
0:82:7 N MOD6 Dest
0:83:7 N MOD7 Source
0:84:7 N MOD7 Amnt
0:85:7 N MOD7 Dest
0:86:7 N MOD8 Source
0:87:7 N MOD8 Amnt
0:88:7 N MOD8 Dest
0:97:7 N ENV3 Rept ON OFF
0:99:7 N OSC1 Note Rset
0:102:7 N OSC1 PUL WID
0:103:7 N OSC2 PUL WID
0:104:7 N OSC2 Note Reset
0:105:7 N LFO1 KEY Sync
0:106:7 N LFO2 KEY Sync
0:107:7 N LFO3 KEY Sync
0:108:7 N LFO4 KEY Sync
0:111:7 N GLD ON OFF
0:113:7 N Ptch BND RGE
0:114:7 N PAN Mode
0:116:7 N MOD WHL Amnt
0:117:7 N MOD WHL Dest
0:118:7 N Presr Amnt
0:119:7 N Presr Dest
0:120:7 N Brth Amnt
0:121:7 N Brth Dest
0:122:7 N Velo Amnt
0:123:7 N Velo Dest
0:124:7 N FT Ctrl Amnt
0:125:7 N FT Ctrl Dest
1:25:14 N FX ON OFF
1:26:14 N FX Select
1:28:14 N FX Param1
1:29:14 N FX Param2

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]