VERSION 1 # Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL TRACKNAME Deckard s Dream MK2 # Can be POLY, DRUM, MPE, or NULL TYPE NULL # Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL OUTPORT NULL # Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI OUTCHAN NULL # Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL INPORT NULL # Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG INCHAN NULL # This defines the default 'MAX RATE' for automation lanes. # Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1 MAXRATE NULL # DRUMLANES # Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME # ROW must be between 1 and 8 # TRIG can be between 0 and 127, or NULL # CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL # NOTENUMBER can be between 0 and 127, or NULL # NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL # Please note this section will be discarded for tracks which are not DRUM tracks [DRUMLANES] [/DRUMLANES] # PC # Syntax: NUMBER NAME # number must be either: # - A number (for simple PC) # - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB. # PC must be between 1...128 # MSB/LSB must be between 0...127 [PC] [/PC] # CC # Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME # DEFAULT_VALUE must be a valid number between 0 and 127 [CC] 7 Global volume 1 Modulation wheel 64 Sustain pedal 103 Feet II 102 Feet I 95 Detune osc II 94 Fine pitch 93 Coarse pitch 116 Keyboard control, brilliance high 118 Keyboard control, level high 117 Keyboard control, level low 115 Keyboard control, brilliance low 50 Filter EG initial level I 46 High pass filter brilliance I 65 Aftertouch brilliance I 47 High pass filter resonance I 48 Low pass filter brilliance I 49 Low pass filter resonance I 62 Initial brilliance I 51 Filter EG after level I 52 Filter attack I 53 Filter decay I 54 Filter release I 73 High pass filter brilliance II 75 Low pass filter brilliance II 76 Low pass filter resonance II 77 Filter EG initial level II 78 Filter EG after level II 79 Filter attack II 91 Aftertouch brilliance II 89 Initial brilliance II 81 Filter release II 80 Filter decay II 119 High pass filter resonance II 69 Pulse width II 67 Pulse width modulation speed II 68 Pulse width modulation amount II 70 Square II 71 Saw II 72 Noise Level II 86 VCA Sustain II 87 VCA Release II 88 VCA Level II 82 VCF level II 90 Initial level II 83 Sine level II 92 Aftertouch level II 84 VCA Attack II 85 VCA Decay II 40 Pulse width modulation speed I 41 Pulse width modulation amount I 42 Pulse width I 43 Square I 44 Saw I 45 Noise Level I 66 Aftertouch level I 63 Initial level I 61 VCA Level I 60 VCA Release I 59 VCA Sustain I 58 VCA Decay I 57 VCA Ittack I 56 Sine level I 55 VCF level I 5 Glide time 120 Glide mode 104 Sub oscillator waveform 108 Sub oscillator to VCA amount 107 Sub oscillator to V amount 106 Sub oscillator to VCO amount 105 Sub oscillator speed 109 Master brilliance 110 Master resonance 8 Mix I II 114 Aftertouch to VCF amount 112 Aftertouch to sub oscillator speed 111 Initial pitchbend 113 Aftertouch to VCO amount [/CC] # CC Pair # Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME # DEFAULT_VALUE must be a valid number between 0 and 16383 [CC_PAIR] [/CC_PAIR] # NRPN # Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME" # Lsb & msb should be between 0 and 127 # Note: LSB can be over 127 ONLY if MSB is 0 or omitted # e.g. '0:1026:7 FOO', or ':2000:7 BAR' # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively # DEPTH can be 7 or 14 # For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs) [NRPN] [/NRPN] # ASSIGN # Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE # POT_NUMBER must be between 1 and 8 # TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot). # Non explicitly-defined pots will be considered "NULL" # VALUE VALIDATION #### For CC: Value must be a valid number between 0 and 119 #### For PB and AT, any text after the TYPE will be ignored #### For CV, value must be between 1 and 4 #### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14 # DEFAULT VALUE #### For CC: DEFAULT_VALUE must be a valid number between 0 and 127 #### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383 #### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs) #### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V" #### Please note default value will be ignored for PB and AT messages. [ASSIGN] [/ASSIGN] # AUTOMATION # Syntax: TYPE:VALUE # TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN" # VALUE VALIDATION #### For CC: Value must be a valid number between 0 and 119 #### For PB and AT, any text after the TYPE will be ignored #### For CV, value must be between 1 and 4 #### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14 # NOTE: You are limited to 64 automation lanes [AUTOMATION] [/AUTOMATION] # This section will be readable from Hapax. [COMMENT] [/COMMENT]