VERSION 1

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Deepmind 12

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
29 VCF Freq
30 VCF Reso
31 VCF MOD
16 LFO1 Rate
17 LFO1 DLY
18 LFO2 Rate
19 LFO2 DLY
20 OSC1 Pmod
21 OSC1 PWM
23 OSC2 Pmod
24 OSC2 Tmod
25 OSC2 Pitch
26 OSC2 LVL
27 Nois LVL
28 Unisdetn
39 VCA D
44 VCA S
41 VCA R
42 VCF A
43 VCF D
45 VCF R
46 MOD A
47 MOD D
48 MOD S
49 MOD R
1 Modwheel
2 Breath
4 Foot MSB
5 Porta
6 Data MSB
7 Volume
8 Balance
10 PAN
11 Exprsson
12 ARP Rate
13 ARP Gate
32 Bank LSB
33 VCF Lfom
34 VCF Keym
35 HPF Freq
36 VCA LVL
37 VCA A
38 Data LSB
50 VCA Acrv
51 VCA Dcrv
56 VCA Scrv
53 VCA Rcrv
54 VCF Acrv
55 VCF Dcrv
57 VCF Rcrv
58 MOD Acrv
59 MOD Dcrv
60 MOD Scrv
61 MOD Rcrv
62 FX1 PAR1
63 FX1 PAR2
64 Suspedal
65 FX1 PAR3
66 FX1 PAR4
67 FX1 PAR5
68 FX1 PAR6
69 FX1 PAR7
70 FX1 PAR8
71 FX1 PAR9
72 FX1 PR10
73 FX1 PR11
74 FX1 PR12
75 FX2 PAR1
76 FX2 PAR2
77 FX2 PAR3
78 FX2 PAR4
79 FX2 PAR5
80 FX2 PAR6
81 FX2 PAR7
82 FX2 PAR8
83 FX2 PAR9
84 FX2 PR10
85 FX2 PR11
86 FX2 PR12
87 FX3 PAR1
88 FX3 PAR2
89 FX3 PAR3
90 FX3 PAR4
91 FX3 PAR5
92 FX3 PAR6
93 FX3 PAR7
94 FX3 PAR8
95 FX3 PAR9
96 Data INC
97 Data DEC
98 Nrpn LSB
99 Nrpn MSB
100 RPN LSB
101 RPN MSB
102 FX3 PR10
103 FX3 PR11
104 FX3 PR12
105 FX1 Type
106 FX2 Type
107 FX3 Type
108 FX4 Type
109 FX1 Gain
110 FX2 Gain
111 FX3 Gain
112 FX4 Gain
113 ANA Thru
114 FX Mode
115 3 D Xaxis
116 3 D Yaxis
117 3 D Zaxis

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]