VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated for HapaxOS 3.2.2 on 2026-10-21 by https://midi.guide,
#   the open, 'comprehensive' dataset of all MIDI CCs and NRPNs.
#   Contributions welcome!


# TRACKNAME
###########
# Supports all alphanumeric ASCII, and ' ', '_', '-', '+'. Can also be NULL.
TRACKNAME Thyme+


# TYPE
######
# Can be POLY, DRUM, MPE, AFTR, POLYAT or NULL
# POLY refers to polyphony, i.e. more than one note. Used for standard MIDI
#   gear and controllers. Confusingly, this is appropriate for instruments
#   and controllers that do not support poly aftertouch.
#
# POLYAT and AFTR are exchangeable, and both handle poly aftertouch as well as
#   channel aftertouch.
TYPE NULL


# OUTPORT
#########
# Can be A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI cable),
#   USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
OUTPORT NULL


# OUTCHAN
#########
# Can be a value between 1 and 16, or NULL. This is ignored if output port is
#   not MIDI.
OUTCHAN NULL


# INPORT
########
# Can be NONE, ALLACTIVE, A, B, C, D, USBD, USBH, USBD[1-16] (virtual MIDI
#   cable), USBH[1-16] (virtual MIDI cable), CVG[1-4], CV[1-4], G[1-4], or NULL.
INPORT NULL


# INCHAN
########
# Can be a value between 1 and 16, ALL, or NULL. This definition will be ignored
#   if INPORT is NONE, ALLACTIVE or CVG.
INCHAN NULL


# MAXRATE
#########
# This defines the default MAXRATE for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL


# DRUMLANES
###########
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
#  - ROW must be between 1 and 16
#  - TRIG can be between 0 and 127, or NULL
#  - CHAN can be a number between 1 and 16, CVG[1-4], CV[1-4], G[1-4], or NULL
#  - NOTENUMBER can be between 0 and 127, or NULL
#  - NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+'. It can
#    also be NULL
#
# This section will be discarded for tracks which are not DRUM tracks.
[DRUMLANES]
[/DRUMLANES]


# PC
####
# Syntax: NUMBER NAME
#  - NUMBER must be either a number (for simple PC), or three numbers,
#    delimited by ':', which represent PC:MSB:LSB. You can put 'NULL'
#    to not set the MSB/LSB
#  - PC must be between 1...128
#  - MSB and LSB, if set, must be between 0...127
[PC]
[/PC]


# CC
####
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 127
[CC]
54 Coarse Robot Sync
46 Coarse Knob Value
47 Coarse Robot Amount
48 Coarse Robot Rate
49 Coarse Robot Shape
50 Coarse Robot Waveform
51 Coarse Robot Phase
52 Coarse Robot Polarity
53 Coarse Robot Stereo
64 Footswitch
120 Activate Bypass
90 Change Pattern
70 Delay Sync
69 Link
68 Freeze
67 Randomize Robots  Tape Machine
66 Randomize Robots
65 Randomize Tape Machine
36 Feedback Robot Sync
28 Feedback Knob Value
29 Feedback Robot Amount
30 Feedback Robot Rate
31 Feedback Robot Shape
32 Feedback Robot Waveform
33 Feedback Robot Phase
34 Feedback Robot Polarity
35 Feedback Robot Stereo
39 Filter Robot Rate
40 Filter Robot Shape
41 Filter Robot Waveform
42 Filter Robot Phase
43 Filter Robot Polarity
44 Filter Robot Stereo
45 Filter Robot Sync
37 Filter Knob Value
38 Filter Robot Amount
63 Fine Robot Sync
62 Fine Robot Stereo
55 Fine Knob Value
56 Fine Robot Amount
57 Fine Robot Rate
58 Fine Robot Shape
59 Fine Robot Waveform
60 Fine Robot Phase
61 Fine Robot Polarity
77 Levels Robot Polarity
71 Levels Knob Value
72 Levels Robot Amount
73 Levels Robot Rate
74 Levels Robot Shape
75 Levels Robot Waveform
76 Levels Robot Phase
78 Levels Robot Stereo
79 Levels Robot Sync
11 Mix Robot Amount
18 Mix Robot Sync
17 Mix Robot Stereo
16 Mix Robot Polarity
15 Mix Robot Phase
14 Mix Robot Waveform
13 Mix Robot Shape
12 Mix Robot Rate
10 Mix Knob Value
81 Spacing Robot Amount
88 Spacing Robot Sync
87 Spacing Robot Stereo
86 Spacing Robot Polarity
82 Spacing Robot Rate
85 Spacing Robot Phase
84 Spacing Robot Waveform
83 Spacing Robot Shape
80 Spacing Knob Value
89 Karplus Strong Decay Time Compensation
20 Tape Speed Robot Amount
27 Tape Speed Robot Sync
26 Tape Speed Robot Stereo
25 Tape Speed Robot Polarity
24 Tape Speed Robot Phase
23 Tape Speed Robot Waveform
22 Tape Speed Robot Shape
21 Tape Speed Robot Rate
19 Tape Speed Knob Value
9 Volume Robot Sync
2 Volume Robot Amount
3 Volume Robot Rate
1 Volume Knob Value
4 Volume Robot Shape
5 Volume Robot Waveform
6 Volume Robot Phase
7 Volume Robot Polarity
8 Volume Robot Stereo
[/CC]


# CC_PAIR
#########
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_\LSB:DEFAULT=xx NAME
#  - DEFAULT_VALUE must be between 0 and 16383
[CC_PAIR]
[/CC_PAIR]


# NRPN
######
# Syntax: MSB:LSB:DEPTH NAME or MSB:LSB:DEPTH:DEFAULT=xx NAME
#  - MSB and LSB should be between 0 and 127
#  - LSB can be over 127 ONLY if MSB is either 0 or omitted. For example:
#    "0:1026:7 FOO" or ":2000:7 BAR"
#    These examples are equivalent to "8:2:7 FOO" and "15:80:7 BAR"
#  - DEPTH can be 7 or 14
#  - DEFAULT_VALUE must be between 0 and 127 (for 7-bit NRPNs) or
#    between 0 and 16383 (for 14-bit NRPNs)
[NRPN]
[/NRPN]


# ASSIGN
########
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
#  - POT_NUMBER must be between 1 and 8
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN",
#    or "NULL" (this won't assign the pot)
#  - Non explicitly-defined pots will be considered "NULL"
#
# VALUE validation
#  - CC: VALUE must be a valid number between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# DEFAULT_VALUE
#  - CC: DEFAULT_VALUE must be between 0 and 127
#  - PB: DEFAULT_VALUE must be between 0 and 16383
#  - NRPN: DEFAULT_VALUE must be a number between 0 and 127 (for 7-bit NRPNs)
#    or between 0 and 16383 (for 14-bit NRPNs)
#  - CV: DEFAULT_VALUE must be either between 0 and 65535, or a voltage between
#    -5V and 5V, e.g. "-4.25V" or "1.7V"
#
# DEFAULT_VALUE will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
############
# Syntax: TYPE:VALUE
#  - TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
#
# VALUE validation
#  - CC: VALUE must be between 0 and 119
#  - PB and AT: Any text after the TYPE will be ignored
#  - CV: VALUE must be between 1 and 4
#  - NRPN: VALUE must be MSB:LSB:DEPTH, with MSB and LSB between 0 and 127,
#    and DEPTH either 7 or 14
#
# You are limited to 64 automation lanes.
[AUTOMATION]
[/AUTOMATION]


# COMMENT
#########
# This section will be readable from Hapax.
[COMMENT]
[/COMMENT]