VERSION 1

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Polybrute

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
1 MOD Wheel
66 VCO1 Tune
70 VCO1 Metalizer
69 VCO1 Pulse Width
65 VCO1 Sync
17 VCO1 SAW TRI MIX
12 VCO1 SAW Square MIX
72 VCO2 Tune
14 VCO2 SUB MIX
75 VCO2 Pulse Width
77 VCO2 FM21
15 VCO2 SAW TRI MIX
16 VCO2 SAW Square MIX
11 EXP EXP1
4 EXP EXP2
6 EXP Glide
3 EXP Morph Knob
9 EXP Ribbon
114 EXP Morphee X
115 EXP Morphee Y
89 EXP Morphee Z
22 Noise Noise Color
79 Filter FM VCO2 VCF1
80 Filter FM Noise VCF2
27 Filter Master Cutoff
71 Filter KEY Track
25 Ladder Cutoff
87 Ladder Resonance
85 Ladder Disto
86 Ladder Series Para
26 Ladder VCF ENV AMT
8 Ladder Level
23 Steiner Cutoff
83 Steiner Resonance
82 Steiner Brute Factor
81 Steiner LP HP BP
24 Steiner VCF ENV AMT
7 Steiner Level
18 Mixer VCO1
19 Mixer VCO2
21 Mixer Noise
94 VCF ENV Velo
102 VCF ENV Attack
103 VCF ENV Decay
28 VCF ENV Sustain
104 VCF ENV Release
95 VCA ENV Velo
105 VCA ENV Attack
106 VCA ENV Decay
29 VCA ENV Sustain
107 VCA ENV Release
108 MOD ENV Delay
109 MOD ENV Attack
110 MOD ENV Decay
30 MOD ENV Sustain
111 MOD ENV Release
90 LFO1 Phase
91 LFO1 Rate
92 LFO2 Fade IN
93 LFO2 Rate
67 LFO3 Curve
68 LFO3 Symmetry
73 LFO3 Rate
13 FX MOD Intensity
31 FX Delay Level
112 FX Delay Time
113 FX Delay Regeneration
2 FX Reverb Level
74 FX REV Time
76 FX REV Damping
10 FX Stereo
116 SEQ Rate
118 SEQ Gate
117 SEQ Motion REC Rate

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]