VERSION 1

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME Virus TI

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
50 Controller 50
1 MOD Wheel
3 Controller 3
4 CTRL Foot
127 Controller 127
6 CTRL Data
126 Controller 126
125 Controller 125
9 Controller 9
124 Controller 124
11 CTRL Expression
12 Controller 12
13 Controller 13
14 Controller 14
15 Controller 15
16 Controller 16
121 Controller 121
120 Controller 120
111 Controller 111
96 Controller 96
95 Controller 95
92 Controller 92
66 CTRL Sostenuto Pedal
65 CTRL Glide Pedal
64 CTRL Hold Pedal
2 CTRL Breath
62 AMP EG SUS Time
61 AMP EG Sustain
60 AMP EG Decay
59 AMP EG Attack
63 AMP EG Release
49 Saturation Curve
30 Filter FM EG AMT
40 Filter1 Cutoff
41 Filter2 Cutoff
42 Filter1 Resonance
43 Filter2 Resonance
44 Filter1 EG AMT
45 Filter2 EG AMT
46 Filter1 Key Follow
47 Filter2 Key Follow
48 Filter Balance
51 Filter1 Mode
52 Filter2 Mode
53 Filter Routing
54 Filter EG Attack
55 Filter EG Decay
56 Filter EG Sustain
57 Filter EG SUS Time
58 Filter EG Release
114 Delay Time
113 Effect Send
112 Delay Verb Mode
108 Chorus Delay
107 Chorus Depth
106 Chorus Rate
105 Chorus Classic Mix
103 Chorus Type
104 Chorus Mix
110 Chorus LFO Shape
109 Chorus Feedback
119 Delay Color
118 Delay LFO Shape
117 Delay Verb Size
116 Delay Verb Time
115 Delay Feedback
98 Unison Detune
32 Bank Select
122 Keyboard Local
123 ALL Notes OFF
10 PAN
8 Balance
99 Unison Spread
91 Volume
5 Glide Time
93 Transpose
94 KEY Mode
101 Input Mode
102 Input Select
97 Unison Mode
89 Filter2 LFO2 AMT
67 LFO1 Rate
68 LFO1 Shape
69 LFO1 EG Mode
70 LFO1 Mode
71 LFO1 Symmetry
72 LFO1 Keyboard
73 LFO1 Restart
76 PW LFO1 AMT
77 Reso LFO1 AMT
78 Filtergain LFO1 AMT
79 LFO2 Rate
80 LFO2 Shape
81 LFO2 EG Mode
82 LFO2 Mode
83 LFO2 Symmetry
84 LFO2 Keyboard
85 LFO2 Restart
86 OSC SHP LFO2 AMT
87 FM LFO2 AMT
88 Filter1 LFO2 AMT
90 PAN LFO2 AMT
100 Unison LFO Phase
38 Ringmod Volume
34 Subosc Volume
36 OSC Mainvolume
33 OSC Balance
37 Noise Volume
74 OSC1 LFO1 AMT
35 Subosc Shape
39 Noise Color
19 OSC1 Wave Select
23 OSC2 Pulsewidth
24 OSC2 Wave Select
25 OSC2 Semitone
26 OSC2 Detune
27 OSC2 FM Amount
28 OSC2 Sync
29 OSC2 Filter EG AMT
31 OSC2 Key Follow
20 OSC1 Semitone
17 OSC1 Shape
21 OSC1 Key Follow
22 OSC2 Shape
18 OSC1 Pulsewidth
75 OSC2 LFO1 AMT

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]