VERSION 1

##########################################################
#            __    __ __                __    __         #
#  .--------|__|--|  |__|  .-----.--.--|__|--|  |-----.  #
#  |        |  |  _  |  |__|  _  |  |  |  |  _  |  -__|  #
#  |__|__|__|__|_____|__|__|___  |_____|__|_____|_____|  #
#                          |_____|                       #
#                                                        #
##########################################################

# Generated on 2026-03-23 by https://midi.guide , the open,
# 'comprehensive' dataset of all MIDI CCs and NRPNs.
# Contributions welcome!

# Supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
TRACKNAME nanobox | tangerine

# Can be POLY, DRUM, MPE, or NULL
TYPE NULL

# Can be A, B, C, D, USBD, USBH, CVGx (x between 1&4), CVx, Gx, or NULL
OUTPORT NULL

# Can be x (between 1-16), or NULL -- this is ignored if output port is not MIDI
OUTCHAN NULL

# Can be NONE, ALLACTIVE, A, B, USBH, USBD, CVG, or NULL
INPORT NULL

# Can be x (between 1-16), ALL, or NULL. This definition will be ignored if INPORT is NONE, ALLACTIVE or CVG
INCHAN NULL

# This defines the default 'MAX RATE' for automation lanes.
# Can be NULL, 192, 96, 64, 48, 32, 24, 16, 12, 8, 6, 4, 3, 2, 1
MAXRATE NULL

# DRUMLANES
# Syntax: ROW:TRIG:CHAN:NOTENUMBER NAME
# ROW must be between 1 and 8
# TRIG can be between 0 and 127, or NULL
# CHAN can be a number between 1 and 16, Gx, CVx, CVGx (x between 1 and 4), or NULL
# NOTENUMBER can be between 0 and 127, or NULL
# NAME supports all alphanumeric ASCII, and ' ', '_', '-', '+' - can also be NULL
# Please note this section will be discarded for tracks which are not DRUM tracks
[DRUMLANES]
[/DRUMLANES]


# PC
# Syntax: NUMBER NAME
# number must be either:
#   - A number (for simple PC)
#   - Three numbers, delimited by ':', which represent PC:MSB:LSB. You can put 'NULL' to not set the MSB/LSB.
# PC must be between 1...128
# MSB/LSB must be between 0...127
[PC]
[/PC]


# CC
# Syntax: CC_NUMBER NAME or CC_NUMBER:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 127
[CC]
14 Pad 1 Filter cutoff
24 Pad 2 Filter cutoff
34 Pad 3 Filter cutoff
44 Pad 4 Filter cutoff
54 Pad 5 Filter cutoff
74 Pad 6 Filter cutoff
84 Pad 7 Filter cutoff
94 Pad 8 Filter cutoff
26 Pad 2 FX1 Send
96 Pad 8 FX1 Send
86 Pad 7 FX1 Send
76 Pad 6 FX1 Send
56 Pad 5 FX1 Send
46 Pad 4 FX1 Send
36 Pad 3 FX1 Send
16 Pad 1 FX1 Send
97 Pad 8 FX2 Send
17 Pad 1 FX2 Send
27 Pad 2 FX2 Send
37 Pad 3 FX2 Send
47 Pad 4 FX2 Send
57 Pad 5 FX2 Send
77 Pad 6 FX2 Send
87 Pad 7 FX2 Send
11 Pad 1 Level
21 Pad 2 Level
31 Pad 3 Level
41 Pad 4 Level
51 Pad 5 Level
71 Pad 6 Level
81 Pad 7 Level
91 Pad 8 Level
82 Pad 7 Pan
12 Pad 1 Pan
22 Pad 2 Pan
32 Pad 3 Pan
42 Pad 4 Pan
52 Pad 5 Pan
72 Pad 6 Pan
92 Pad 8 Pan
23 Pad 2 Pitch
33 Pad 3 Pitch
93 Pad 8 Pitch
83 Pad 7 Pitch
73 Pad 6 Pitch
53 Pad 5 Pitch
43 Pad 4 Pitch
13 Pad 1 Pitch
25 Pad 2 Resonance
95 Pad 8 Resonance
85 Pad 7 Resonance
15 Pad 1 Resonance
75 Pad 6 Resonance
55 Pad 5 Resonance
45 Pad 4 Resonance
35 Pad 3 Resonance
98 Pad 8 Slice
18 Pad 1 Slice
28 Pad 2 Slice
38 Pad 3 Slice
48 Pad 4 Slice
58 Pad 5 Slice
78 Pad 6 Slice
88 Pad 7 Slice
29 Pad 2 Slice sequence
19 Pad 1 Slice sequence
99 Pad 8 Slice sequence
89 Pad 7 Slice sequence
79 Pad 6 Slice sequence
59 Pad 5 Slice sequence
49 Pad 4 Slice sequence
39 Pad 3 Slice sequence

[/CC]

# CC Pair
# Syntax: CC_MSB:CC_LSB NAME or CC_MSB:CC_LSB:DEFAULT=xx NAME
# DEFAULT_VALUE must be a valid number between 0 and 16383
[CC_PAIR]

[/CC_PAIR]

# NRPN
# Syntax: "MSB:LSB:DEPTH NAME" or "MSB:LSB:DEPTH:DEFAULT=xx NAME"
# Lsb & msb should be between 0 and 127
  # Note: LSB can be over 127 ONLY if MSB is 0 or omitted
  # e.g. '0:1026:7 FOO', or ':2000:7 BAR' 
  # the examples above would be equivalent to '8:2:7 FOO' and '15:80:7 BAR' respectively
# DEPTH can be 7 or 14
# For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
[NRPN]

[/NRPN]


# ASSIGN
# Syntax: POT_NUMBER TYPE:VALUE or POT_NUMBER TYPE:VALUE DEFAULT=DEFAULT_VALUE
# POT_NUMBER must be between 1 and 8
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", "NRPN", or "NULL" (this won't assign the pot).
# Non explicitly-defined pots will be considered "NULL"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# DEFAULT VALUE
#### For CC: DEFAULT_VALUE must be a valid number between 0 and 127
#### For PB: DEFAULT_VALUE must be a valid number between 0 and 16383
#### For NRPN: DEFAULT_VALUE must be a valid number, either between 0 and 127 (for 7 bit NRPNs) or between 0 and 16383 (for 14bit NRPNs)
#### For CV: DEFAULT_VALUE must be either a valid number between 0 and 65535, or a voltage between -5V and 5V, e.g. "-4.25V" or "1.7V"
#### Please note default value will be ignored for PB and AT messages.
[ASSIGN]
[/ASSIGN]


# AUTOMATION
# Syntax: TYPE:VALUE
# TYPE can be "CC", "PB" (pitchbend), "AT" (aftertouch), "CV", or "NRPN"
# VALUE VALIDATION
#### For CC: Value must be a valid number between 0 and 119
#### For PB and AT, any text after the TYPE will be ignored
#### For CV, value must be between 1 and 4
#### For NRPN, value must be MSB:LSB:DEPTH, with both lsb & msb bebtween 0 and 127, and DEPTH being either 7 or 14
# NOTE: You are limited to 64 automation lanes
[AUTOMATION]
[/AUTOMATION]


# This section will be readable from Hapax.
[COMMENT]

[/COMMENT]